Skip Navigation LinksHome | Products | High Voltage | HTP-NHS

HTP-NHS

6 Channel NIM High Voltage PSU

Max. Voltage 6kV
Min. Power 1W
Max. Power 9W
Case Style NIM
The HTP-NHS is a 6 channel high voltage power supply in 1/12 NIM standard cassette. A full colour 1.44-inch TFT display enables the set up of each channel. Along with individual voltage and current limits, the user can set V & I ramps from the front panel. LEDs for channel ready and HV ON clearly show the output status. The output voltage is highly stable. Both standard accuracy and high precision versions with lower ripple and noise are offered. The ripple remains low down to very low frequencies such as 0.1Hz.

All HTP-NHS modules are equipped with 24 bit ADC and 20 bit DAC circuits. The sample rates and digital filter averages are adjustable enabling excellent setting and measurement resolution. The high precision units have a 2nd current measurement range. This enables loads taking a just a few picoamps to be measured and characterised.

Remote control is provided via USB or CAN. Up to 12 modules can be connected via CAN and controlled from a single USB interface via a converter. Comprehensive software is available and ideal for more complex systems where event based programmable trip parameters are useful. Overload, short-circuit and arc protection is provided. A safety interlock circuit along with inputs for an external INHIBIT signal are also built in as standard. Recessed 10 position potentiometers enable maximum voltage and current limits to be set for the whole module to help protect sensitive loads such as PhotoMultiplier Tubes or Detectors. The HV outputs are provided via SHV sockets and are located on the rear panel.
Did you know...
  • The High Precision range of HTP-NHS cassettes benefit from up to a 50% reduction in ripple and noise (as low as <3mV peak-to-peak), and improved measurement resolution.
  • The polarity of these units is factory-fixed, and should be specified during the order process. If your application requires user setting of polarity, consider our HTP-NHQ range.
 

Request Quotation For This Unit

High Precision Models
 Part NumberMax. Power per ChannelMaximum VoltageMaximum Current
HTP-NHS 62 01x1W0 - 100V0 - 10mA
HTP-NHS 62 10x9W0 - 1kV0 - 8mA
HTP-NHS 62 20x8W0 - 2kV0 - 4mA
HTP-NHS 62 30x9W0 - 3kV0 - 3mA
HTP-NHS 62 40x8W0 - 4kV0 - 2mA
HTP-NHS 62-60x6W0 - 6kV0 - 1mA
Use the Add button to add a unit to your QuoteCart.
You can check your QuoteCart by hovering your mouse over the "QuoteCart" button.

Different output ranges and application/user specific options are possible. Please contact ETPS to discuss your requirements.

Standard Models
 Part NumberMax. Power per ChannelMaximum VoltageMaximum Current
HTP-NHS 60 01x1W0 - 100V0 - 10mA
HTP-NHS 60 10x9W0 - 1kV0 - 8mA
HTP-NHS 60 20x8W0 - 2kV0 - 4mA
HTP-NHS 60 30x9W0 - 3kV0 - 3mA
HTP-NHS 60 40x8W0 - 4kV0 - 2mA
HTP-NHS 60-60x6W0 - 6kV0 - 1mA
Use the Add button to add a unit to your QuoteCart.
You can check your QuoteCart by hovering your mouse over the "QuoteCart" button.

Different output ranges and application/user specific options are possible. Please contact ETPS to discuss your requirements.


ETPS Ltd
Unit 14, The Bridge
Beresford Way
Chesterfield, S41 9FG
sales@etps.co.uk
Problem Solving Copyright © 1999 - 2017