Skip Navigation LinksHome | Products | DC Electronic Loads | ELP-3320


Static DC Electronic Load Modules

ELP-3320: Static DC Electronic Load Modules
Max. Voltage Model 500VDC
Min. Power Model 75W
Max. Power Model 300W
Operating Modes CC, SC
Dynamic Function No
Case Style Desktop/Rack Mount
The ELP-3320 series is the ideal low cost solution when only adjustable constant current operation is required. The units feature dual ranges thus providing a very tight resolution in the lower range. Sink values can be preset before activating the load's input. The current slew rate can be adjusted in 3 steps with the fastest fall times possible in the higher current range.

Operating the low resistance short mode allows the user to read the actual short current up to the electronic load's maximum rating. An isolated current monitor allows the load current to be viewed on an oscilloscope.

Up to 4 modules from this series can be housed in either the ELP-3301A mainframe or if only a single module is required the 3302C mainframe should be chosen.

Did You Know...

  • The ELP-3320 must be housed in a single slot chassis (option /3302F), dual slot chassis (option /3305F) or four slot chassis (option /3300F).
    See separate datasheet
Product Family
 Part NumberMaximum PowerMaximum VoltageMaximum Current
ELP-3320150W60VDC0 - 30A
ELP-3321300W60VDC0 - 60A
ELP-3322300W250VDC0 - 10A
ELP-3324200W500VDC0 - 5A
ELP-332575W60VDC0 - 15A
Use the Add button to add a unit to your QuoteCart.
You can check your QuoteCart by hovering your mouse over the "QuoteCart" button.

Different output ranges and application/user specific options are possible. Please contact ETPS to discuss your requirements.
Unit 14, The Bridge
Beresford Way
Chesterfield, S41 9FG
Problem Solving Copyright © 1999 - 2020